>>28213686
They're likely not going to be a different diameter because the holes in your hub that accept the press fit from the studs are a specific size. They're just going to be longer so they reach past the thicker center of the alloy wheels.
>Which tools do I need to change studs?
If you're asking this, you probably can't do it. Go watch a video. If your hub has enough space between it and the upright, you can just hammer them out without having to remove anything more than the caliper and rotor, then use the nuts to press the new ones in. If it doesn't have enough space to pull the studs from behind, you might have to pull the hub.

Back | Go to board

Board:

/o/

Thread:

help wrenchlet changing wheels